|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
Features
- Excellent insulation
- Prevention of dew formation
- Excellent workability
- Economic efficiency
- Attractive exterior appearance
- Excellent durability
Specifiacations
| Recommended Uses |
Slate, cement, concrete, plaster, PC mortar, PALC |
| Product Data |
1. Type: Acrylic Latex
2. Thinner: Tap Water
3. Theoretical Coverage: 0.45m2/liter
4. Dry Film Thickness: 1.4㎜ |
| Other cautions |
1. Store at room temperature between 5°C-35°C, away from direct sunlight or frost.
2. Shelf life is 6 months. The quality may change with time. |
Use
- Surface Preparation
a) Completely remove any oil, water, dust, aged paint film and other contaminants from the surface.
b) After the surface has been properly treated, cement mortar should be cured for at least 28 days at a pH level below 9 and water content below 8%.
- Application
a) Mix equal portion (by weight) of adhesive mortar and cement and attach an appropriate dtyrofoam panel for insulation.
b) Apply adhesive mortar, spread reinforcement glass wool, then smear another coat of adhesive mortar over the glass wool so that it is completely covered.
c) After the adhesive mortar is dry, apply the topcoat using a plasterboard, spray or roller to achieve the desired consistency.
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page